Requesting a registered source

You can request a registered source while listening to other sources or during the clock display.

1 Press (TALK) on the rotary commander.

2 After you hear the unit’s vocalised instruction “Please speak now.”, pronounce the registered phrase such as the disc name or the radio station.

Please

 

speak

 

now.

SONY

GB

H I TS

3 When the unit successfully recognised the phrase;

The unit will play the disc or tune in the radio station.

When the unit fails to recognise the phrase;

The unit replies “Please speak again.” In this case, repeat the same registered phrase.

Notes

•When the unit fails to recognise the phrase three times, a beep sounds and the unit returns to the previous source. In this case, repeat the same process starting from step 1.

•If it is noisy outside the car, the unit may not recognise the registered phrase. In this case, close the window and try again.

•If you are far from the microphone, speak louder or come nearer to the microphone.

Tips

•If you do not reply within three seconds after the vocalised instruction, the unit replies “Please speak now.”

•When you are requesting a registered source, pronounce clearly and loudly to make it easier for the unit to recognise.

•When the unit has difficulty recognising the phrase, register the vocal phrase again.

Voice Memo

Voice Memo is a function that allows you to record a voiced memorandum, such as the name of a song heard on a radio programme or an idea which comes to mind. You can record up to six voice memos with this function. Note that each voice memo must be within 15 seconds.

MEMO 6

MEMO 1

MEMO 5

MEMO 2

MEMO 4

MEMO 3

You can record or play back the voice memo when listening to any source or during the clock display.

Use the rotary commander to control this function.

Note

While the unit is receiving, recording, or playing back the traffic announcements, the voice memo function does not work.

Recording a voice memo

1 Press (REC) on the rotary commander and voice your memorandum towards the supplied microphone.

2 The recording is completed by pressing (REC) again or leaving the unit untouched for 15 seconds.

Notes

•The voice memos are recorded as “MEMO 1”, “MEMO 2”, etc.,…in the order they are recorded.

•When a beep sounds and “MEMO FULL” appears, it means there is no room for additional voice memos. In such a case, erase the older recorded voice memos before recording new ones.

22