Attenuating the sound

Press (ATT) on the rotary commander or optional wireless remote.

“ATT on” appears momentarily.

To restore the previous volume level, press (ATT) again.

Tip

When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function).

Changing the sound and display settings

The following items can be set: •Clock (page 7).

•CT (Clock Time) (page 20).

•D.Info (Dual Information) - to display the clock and the play mode at the same time (ON) or to display the information alternately (OFF).

•SA (Spectrum Analyzer)-to change the display pattern of the equalizer display.

•Amber/Green - to change the illumination colour to amber or green.

•Dimmer - to change the brightness of the display.

—Select “Auto” to dim the display only when you turn the lights on.

—Select “on” to dim the display.

—Select “off” to deactivate Dimmer. •Contrast - to adjust the contrast if the

indications in the display are not recognisable because of the unit’s installed position.

•Voice guide function for vocalised comments.

—Select “Voice 1” to minimise the volume of the guide.

—Select “Voice 2” to increase the volume than “Voice 1.”

—Select “Voice 3” to maximise the volume of the guide.

—Select “Voice off” to deactivate Voice

guide.

•Beep - to turn on or off the beeps.

•RM (Rotary Commander) - to change the operative direction of the controls of the rotary commander.

—Select “norm” to use the rotary commander in the factory-set position.

—Select “rev” when you mount the rotary commander on the right side of the steering column.

•M.dspl (Motion Display) - to turn the motion display to 1, 2, or Off.

•English/Spanish - to change the vocalised comments of the voice guide and the display language to English or Spanish.

•A.Scrl (Auto Scroll) (pages 9, 32)

30