Changing the display item

Each time you press (DSPL/SA), the item changes as follows:

V

Elapsed playback time

V

Disc name*1/Artist name*2

V

Track name*1

V

Clock

*1 If you inserted a non-CD TEXT disc,

“NO D.Name” or “NO T.Name” appears in the display.

*2 If you play a CD TEXT disc, the artist name appears in the display after the disc name. (Only for CD TEXT discs with the artist name.)

After if you select the desired item, the display will be automatically change to the Motion Display mode after about a few seconds.

In the Motion Display mode, all the above items are scrolled in the display one by one in order.

Tip

The Motion Display mode can be turned off. (See ”Changing the sound and display settings” on page 30).

You can label CD and CD TEXT discs with a personalised name using the disc memo function, refer to “Labelling a CD” (page 36). However, if you use personalised labels, they will always take priority over the original CD TEXT information when such information is displayed.

Tips

∙If the name of the CD TEXT disc is too long, you can scroll it across the display by pressing

(SHIFT), then (2) (T).

∙If you want to display the original CD TEXT information after labelling the CD TEXT disc with a personalised name, press (SHIFT) , then (5) (t).

Automatically scrolling a disc name— Auto Scroll

If the disc name/artist name or track name on a CD TEXT disc exceeds 10 characters and the Auto Scroll function is on, the disc or artist name automatically scrolls on the display as follows:

•The disc name appears when the disc has changed (if the disc name is selected).

•The track name appears when the track has changed (if the track name is selected).

If you press (DSPL/SA) to change the display item, the disc or track name of the CD TEXT disc is scrolled automatically whether you set the function on or off.

1 During playback, press (SHIFT).2 Press (3) (SET UP) repeatedly until “A.Scrl” appears.3 Press (5) (t) to select “A.Scrl on.”4 Press (SHIFT).

To cancel Auto Scroll, select “A.Scrl off” in step 3 above.

Note

For some CD TEXT discs with extremely many characters, the following cases may happen:

—Some of the characters are not displayed.

—Auto Scroll does not work.

Locating a specific track— Automatic Music Sensor (AMS)

During playback, push the SEEK/AMS control up or down momentarily.

To locate succeeding tracks

To locate preceding tracks

Locating a specific point in a track—Manual Search

During playback, push the SEEK/AMS control up or down and hold. Release when you have found the desired point.

To search forward

To search backward

Note

If “” or “ ” appears in the display, it means you have reached the beginning or the end of the disc and you cannot go any further.

9