Changing the display item
Each time you press (DSPL/SA), the item changes as follows:
Station Name (Frequency) y Clock
After if you select the desired item, the display will be automatically change to the Motion Display mode after about a few seconds.
In the Motion Display mode, all the above items are scrolled in the display one by one in order.
Tip
The Motion Display mode can be turned off. (See ”Changing the sound and display settings” on page 30).
Note
“NO Name” appears if the received station does not transmit RDS data.
Re-tuning the same programme automatically
— Alternative Frequencies (AF)The Alternative Frequencies (AF) function automatically selects and
Frequencies change automatically.
98.5MHz96.0MHz
Station
102.5MHz
1 Select an FM station (page 12).2 Press (AF/TA) repeatedly until “AF on” appears.The unit starts searching for an alternative station with a stronger signal in the same network.
Note
When there is no alternative station in the area and you do not need to search for an alternative station, turn the AF function off by pressing (AF/TA) repeatedly until “AF TA off” appears.
Changing the display item
Each time you press (AF/TA), the item changes as follows:
B AF on | B TA on | B AF TA on* |
AF TA off b
*Select this to turn on both the AF and TA functions.
Notes
•“NO AF” and the station name flash alternately, if the unit cannot find an alternative station in the network.
•If the station name starts flashing after selecting a station with the AF function on, this indicates that no alternative frequency is available. Push the SEEK/AMS control up or down while the station name is flashing (within eight seconds). The unit starts searching for another frequency with the same PI (Programme Identification) data (“PI seek” appears and no sound is heard). If the unit cannot find another frequency, “NO PI” appears, and the unit returns to the originally selected frequency.
Listening to a regional programmeThe “REG on” (regional on) function lets you stay tuned to a regional programme without being switched to another regional station.
(Note that you must turn the AF function on.) The unit is factory preset to “REG on,” but if you want to turn off the function, do the following.
1 Press (SHIFT), then press (4) (PLAY MODE) repeatedly until “REG” appears.
2 Press (5) (t) repeatedly until “REG off” appears.3 Press (SHIFT).
Note that selecting “REG off” might cause the unit to switch to another regional station within the same network.
To return to regional on, select “REG on” in step 2 above.
Note
This function does not work in the United Kingdom and in some other areas.
15