1 Press (SOURCE) to select a source (tuner, CD, or MD).
2 Press (SOUND) repeatedly until “DSO” appears.
| 3 | Rotate the dial to select the desired DSO | |
|
| mode. | |
|
| 1 | |
|
| 4 | |
|
| 7 LIVE y 8 CLUB y off | |
|
| To cancel the DSO mode, select “off.” | |
|
| After three seconds, the display returns to | |
|
| the normal playback mode. | |
| Adjusting the DSO mode | ||
GB | |||
1 | Press (SOUND) for two seconds. | ||
| |||
| 2 | Rotate the dial to select the desired DSO | |
|
| mode. | |
|
| 1 | |
|
| 4 | |
|
| 7 LIVE y 8 CLUB y off | |
| 3 | Press (5) (t) . | |
Effect 1 y Effect 2 y Effect 3 y Effect 4 y
Effect 5
If you want to change the DSO mode to be adjusted at this time, press (2) (T) to return to step 2.
To restore the
5 Press (SOUND) for two seconds. When the effect setting is complete, the normal playback mode appears.
Adjusting the balance (BAL)
You can adjust the sound balance from the left and right speakers.
1 Press (SOURCE) to select a source (tuner, CD, or MD).
2 Press (SOUND) repeatedly until “BAL” appears.3 Rotate the dial to adjust the balance.After three seconds, the display returns to the normal playback mode.
Adjusting the fader (FAD)
Normally, with the DSP mode on, the volume of the output sound from the front and rear speakers is lowered automatically to improve the efficiency of the listening position setting. If you want to raise the front and rear speaker volume, adjust the fader.
1 Press (SOURCE) to select a source (tuner, CD, or MD).
2 Press (SOUND) repeatedly to select the “F” for the front speakers or “R” for the rear speakers.
3 Rotate the dial to adjust the volume of front/rear speakers.Decreases speaker volume
Increases speaker volume
After three seconds, the display returns to the normal playback mode.
26