11

Receiving the stored stations

1Press (SOURCE) repeatedly to select the
radio.
2Press (MODE) repeatedly to select the
band.
3Press the number button ((1) to (6)) on
which the desired station is stored.
Tip
Press either side of (PRESET) to receive the stations
in the order they are stored in the memory (Preset
Search func ti on ).

If preset tuning does not work

Press either side of (SEEK) to search for
the station (automati c tunin g).
Scanning stops when the unit receives a
statio n. Repeat un t il th e desired s ta tion is
received.
Tips
If automatic tuning stops too frequently, turn on the
Local Seek to limit seek to stations with stronger
signals (pa ge 19) .
If you know the frequency of the station you want to
listen to, press and hold either side of (SEEK) to
locate the approximate frequency, then press
(SEEK) repeatedly to fine adjust to the desired
frequency (manual tuning).

If FM stereo reception is poor

Select monaural reception mode (page
19).
The s ound impr oves, but becomes mo naural
(ST disappears).

Storing only the desired

stations

You can ma nually pr eset the desire d stations on
any chosen number button.
1Press (SOURCE) repeatedly to select the
radio.
2Press (MODE) repeatedly to select the
band.
3Press either side of (SEEK) to tune in the
station that you want to store .
4Press the desired number button ((1) to
(6)) for 2 seconds until MEM appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.