Additional settings (DEGAUSS/
CANCEL MOIRE)
You can manually degauss (demagnetize) the monitor, and adjust the moire cancellation level.
1Press the center of the control button.
The main MENU appears on the screen.
2Move the control button m/M to highlight 
DEGAUSS/CANCEL MOIRE and press the center of the control button again.
The DEGAUSS/CANCEL MOIRE menu appears on the screen.
3Move the control button m/M to select the desired adjustment item.
Adjust the selected item according to the following instructions.
Degaussing the screen
The monitor is automatically demagnetized (degaussed) when the power is turned on.
To manually degauss the monitor, first move the control button m/Mto select 
(DEGAUSS). Then move the control button ,.
The screen is degaussed for about 5 seconds. If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result.
Adjusting the moire*
If elliptical or wavy patterns appear on the screen, adjust the moire cancellation level.
To adjust the amount of moire cancellation, first move
the control button m/M to select 
(CANCEL MOIRE). Then move the control button </, until the moire effect is at a minimum.
*Moire is a type of natural interference which produces soft, wavy lines on your screen. It may appear due to interference between the pattern of the picture on the screen and the phosphor pitch pattern of the monitor.
Example of moire
Resetting the adjustments
This monitor has the following three reset methods. Use the RESET button to reset the adjustments.
RESET
Resetting a single adjustment item
Use the control button to select the adjustment item you want to reset, and press the RESET button.
Resetting all of the adjustment data for the current input signal
Press the RESET button when no menu is displayed on the screen. Note that the following items are not reset by this method:
•
•picture’s rotation (page 11)
Resetting all of the adjustment data for all input signals
Press and hold the RESET button for more than two seconds. Note that the following item is not reset by this method:
• color menu user settings (page 11)
12
