Getting Started

Installing the speakers on a wallCaution

Contact a screw shop or installer for information regarding the wall material or screws to be used.

Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam. Install the speakers on a vertical and flat wall where reinforcement is applied.

Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc.

Before installing the front speakers of DAV-DZ680W or the front and surround speakers of DAV- DZ880W on a wall, you need to disassemble the speakers. You can install the upper part of a speaker on a wall.

To disassemble the speaker(Front speakers of DAV-DZ680W or front and surround speakers of DAV-DZ880W only)1 Pull out the speaker cord from the slot of the rear of the speaker.

Speaker cord

,

Rear of the speaker

2 Disconnect the speaker cords from the speaker.

Rear of the speaker

18GB