To cancel pairing

Perform the ID setting of the unit according to the procedure of “To set the ID of the unit.” If you select a new ID, pairing is canceled.

If sound transmission is unstable

For the surround amplifier

For the S-AIR receiver

If you use multiple wireless systems which share the 2.4 GHz band, such as wireless LAN or Bluetooth, the transmission of S-AIR products or other wireless systems may be unstable. In this case, the transmission may be improved by changing the following “RF CHANGE” setting.

1 Press SYSTEM MENU.

2 Press X/x repeatedly until “RFCHANGE” appears in the front panel display, then press or c.

3 Press X/x to select the desired setting.

•“AUTO”: Normally select this. The system changes “RF CHANGE” to “ON” or “OFF” automatically.

•“ON”: The system transmits sound by searching for the better channel for transmitting.

•“OFF”: The system transmits sound by fixing the channel for transmitting.

4 Press .

The setting is made.

5 Press SYSTEM MENU.

The system menu turns off.

6 When you set “RF CHANGE” to “OFF,” select the ID so that sound transmission is most stable (page 89).

Note

•In most cases, you will not need to change this setting.

–If “RF CHANGE” is set to “OFF,” transmission between the unit and S-AIR sub unit can be performed using one of the following channels.

–S-AIR ID A: equivalent channel for IEEE 802.11b/g channel 1

–S-AIR ID B: equivalent channel for IEEE 802.11b/g channel 6

–S-AIR ID C: equivalent channel for IEEE 802.11b/g channel 11

•The transmission may be improved by changing the transmission channel (frequency) of the other wireless system(s). For details, refer to the operating instructions of the other wireless system(s).

Device Audio HDMI/External for Control

93GB