Set the [TEST TONE] to [ON].

[L/R] 3.0 m/10 ft3): Set the front speaker distance.

[CENTER] 3.0 m/10 ft3)4): Set the center speaker distance (up to 1.6 meters (5 ft) closer to the front speakers).

1)0.9 to 6.9 meters for North American models.

2)0.0 to 6.9 meters for North American models.

3)When you perform the Quick Setup (page 36), the default settings are changed.

4)This item appears when you set [CENTER] to [YES] in the [CONNECTION] setting.

x[DISTANCE (SURROUND)]

When you move the surround speakers, be sure to set the parameters of the distance (B) from the listening position to the speakers.

You can set the parameters from 0.0 to 7.0 meters1) (0 to 23 ft).

B

[L/R] 3.0 m/10 ft2)3): Set the surround speaker distance (up to 5.0 meters (16 ft) closer to the front speakers).

1)0.0 to 6.9 meters for North American models.

2)When you perform the Quick Setup (page 36), the default settings are changed.

3)This item appears when you set [SURROUND] to [YES] in the [CONNECTION] setting.

Note

•If all front and surround speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker.

•Do not place the surround speakers farther away from your listening position than the front speakers.

•Depending on the input stream, the [DISTANCE] setting may not be effective.

x[LEVEL (FRONT)]

You can adjust the sound level of the front speakers, center speaker, and subwoofer. You can set the parameters from –6.0 dB to 0 dB for [L/R], and from –6.0 dB to +6.0 dB for [CENTER] and [SUBWOOFER]. Be sure to set [TEST TONE] to [ON] for easy adjustment.

[L/R] 0.0 dB: Set the front speaker level.

[CENTER] 0.0 dB*: Set the center speaker level.

[SUBWOOFER] +2.0 dB: Set the subwoofer level.

*This item appears when you set [CENTER] to [YES] in the [CONNECTION] setting.

x[LEVEL (SURROUND)]

You can adjust the sound level of the surround speakers. You can set the parameter from –6.0 dB to +6.0 dB. Be sure to set [TEST TONE] to [ON] for easy adjustment.

[L/R] 0.0 dB*: Set the surround speaker level.

*This item appears when you set [SURROUND] to [YES] in the [CONNECTION] setting.

x[TEST TONE]

The speakers will emit a test tone to adjust [LEVEL (FRONT)] and [LEVEL (SURROUND)].

[OFF]: The test tone is not emitted from the speakers.

[ON]: The test tone is emitted from each speaker in sequence while adjusting the level. When you select one of the [SPEAKER SETUP] items, the test tone is emitted from each speaker in sequence.

Adjust the sound level as follows.

1

2 Press C/X/x/c repeatedly to select the desired speaker and the level.

3 Press .

4 Repeat Steps 1 to 3.5 Press C/X/x/c repeatedly to set [TESTTONE] to [OFF] after adjusting the speaker level.
68GB