Tip
• To confirm the current ID, perform Steps 1 to 3 above. When you pair the unit with the S-AIR sub
ID A
S-AIR sub unit
ID A
ID A
S-AIR sub unit
Set the S-AIR sub unit to the same ID. Sound transmission is established as follows (example):
S-AIR main unit
(This unit)
7
Press SYSTEM MENU. The system menu turns off.
6
Press .
The setting is made.
5
Press X/x to select the desired ID. You can select any ID (A, B, or C).
4
The system turns on.
2 Press SYSTEM MENU.
3 Press X/x repeatedly until “S-AIR ID” appears in the front panel display, then press or c.
Press "/1 on the unit.
1
Establishing sound transmission between the unit and S-AIR sub unit
(ID setting)
For the surround amplifier For the S-AIR receiver
Simply by matching the ID of the unit and the S-AIR sub unit, you can establish sound transmission.
To set the ID of the unit

Using an S-AIR Product

The unit is compatible with the S-AIR function (page 120), which allows sound transmission between S-AIR products.

About S-AIR products

There are two types of S-AIR products.

•S-AIR main unit (this unit): This is for transmitting sound. You can use up to three S-AIR main units. (The number of usable S-AIR main units depends on the use environment.)

•S-AIR sub unit: This is for receiving sound.

–Surround amplifier: You can enjoy surround speaker sound wirelessly.

–S-AIR receiver: You can enjoy system sound in another room.

Room A

S-AIR main unit

S-AIR sub unit

(surround amplifier)

Room B

S-AIR sub unit

(S-AIR receiver)

Note

•You cannot operate this function if you do not insert the wireless transceiver into the unit correctly (page 32).

Device Audio HDMI/External for Control

89GB