The unit starts pairing and “SEARCH” flashes in the front panel display.
To cancel pairing, press SYSTEM MENU.
Start pairing of the S-AIR sub unit.
x For the surround amplifier
Press POWER on the surround amplifier to turn on the surround amplifier and press PAIRING on the rear panel of the surround amplifier.
The PAIRING indicator of the surround amplifier flashes red when pairing starts. When sound transmission is established, the PAIRING indicator of the surround amplifier turns red and “PAIRING” and “COMPLETE” appear alternately in the front panel display.
Tip
• To press PAIRING on the rear panel of the surround amplifier, a slim instrument, such as a paper clip, can be used.
• To set the ID of the surround amplifier, see “To set the ID of the surround amplifier” (page 90).
• To set the ID of the S-AIR receiver, refer to the operating instructions of the S-AIR receiver.
3 Press SYSTEM MENU.
4 Press X/x repeatedly until “PAIRING” appears in the front panel display, then press or c.
5 After “START” appears in the front panel display, press .
xBefore pairing

Sound transmission is established by ID (example).

Your room

Neighbor

This unit

ID A

ID A

ID A

S-AIR sub unit

S-AIR sub unit

6

xAfter pairing

Sound transmission is established between the paired unit and S-AIR sub unit(s) only.

Your room

Neighbor

This unit

 

ID A

No transmission

ID A

ID A

S-AIR sub unit

S-AIR sub unit

Pairing

To perform pairing1 Place the S-AIR sub unit that you want to pair near the unit.

•Remove headphones from the surround amplifier (if connected).

2 Match the IDs of the unit and the S-AIR sub unit.

•To set the ID of the unit, see “To set the ID of the unit” (page 89).

7

xFor the S-AIR receiver

Refer to the operating instructions of the S-AIR receiver.

When sound transmission is established, “PAIRING” and “COMPLETE” appear alternately in the front panel display.

Note

•Perform pairing within several minutes of Step 5. If you do not, “PAIRING” and “INCOMPLETE” appear alternately in the front

panel display. To continue pairing, press and start again from Step 5. To cancel pairing, press

SYSTEM MENU.

Press SYSTEM MENU.

The system menu turns off.

92GB