X
1 Turn on your TV.
2 Switch the input selector on the TV to this system.
/m/ M/
STEP
/ ,
/
./>
H
x
OPERATION DIAL PHONES jack
"/1
FUNCTION
+/–
MUTING
VOLUME +/–

Disc

Playing a Disc

Depending on the DVD VIDEO or VIDEO CD, some operations may be different or restricted. Refer to the operating instructions supplied with your disc.

 

 

 

 

 

 

 

 

Adjust the volume

"/1

 

 

Z N FUNCTION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Disc tray

3 Press "/1.

The system turns on.

Unless the system is set to “DVD,” press FUNCTION +/– to select “DVD.”

4 Press Z on the unit to open the disc tray, and place a disc on the tray.

Place one disc on the tray, and then press Z.

With the label side up.

Note

•When you play an 8 cm disc, place it on the inner circle of the tray. Be careful that the disc is not skewed on the inner circle of the tray.

•Do not place more than one disc on the tray.

5 Press H.

The system starts playback (continuous play).

6 Adjust the volume by using VOLUME +/–on the remote or the VOLUME control on the unit.

The volume level appears on the TV screen and in the front panel display.

Note

•When you set the Control for HDMI function to on, the TV that is connected to the system with an HDMI cable can be sync-operated with the system. For details, see “Using the Control for HDMI Function for “BRAVIA” Sync” (page 73).

To turn the system off

Press "/1 while the system is on. The system enters standby mode.

To save power in standby mode

Press "/1 while the system is on.

To enter power saving mode, make sure that the system is in the following status.

–“DEMO” is set to “OFF” (page 33).

–[CONTROL FOR HDMI] is set to [OFF] (page 73).

–“S-AIR STBY” is set to “STBY OFF” (page 91).

44GB