5 Press X/x to select a language, then press .

The Setup Display for selecting the aspect ratio of the TV to be connected appears.

VIDEO SETUP

TV TYPE:

16:9

 

LINE:

16:9

 

PAUSE MODE:

4:3 LETTER BOX

 

 

4:3 PAN SCAN

 

6 Press X/x to select the setting that matches your TV type, then press .

[16:9]: For a wide-screen TV or a 4:3 standard TV with a wide-screen mode (page 64)

[4:3 LETTER BOX] or [4:3 PAN SCAN]: For a 4:3 standard TV (page 64)

The Setup Display for selecting the output method for video signals from the EURO AV T OUTPUT (TO TV) jack on the rear panel of the unit appears.

VIDEO SETUP

TV TYPE:

16:9

LINE:

VIDEO

PAUSE MODE:

VIDEO

 

RGB

7 Press X/x to select the output method for video signals, then press .

[VIDEO]: Outputs video signals.

[RGB]: Outputs RGB signals.

Note

If your TV does not accept RGB signals, no picture appears on the TV screen even if you select [RGB]. Refer to the operating instructions supplied with your TV.

The Setup Display for the Control for HDMI function appears.

HDMI SETUP

HDMI RESOLUTION:

AUTO(1920x1080p)

CONTROL FOR HDMI:

 

OFF

VOLUME LIMIT:

 

OFF

YCBCR/RGB(HDMI):

 

ON

AUDIO(HDMI):

 

OFF

JPEG RESOLUTION:

 

SD

8 Press X/x to select the setting, then press .

[OFF]: The Control for HDMI function is set to off.

[ON]: The Control for HDMI function (page 73) is set to on.

The Setup Display for selecting the speaker formation appears.

SPEAKER FORMATION

STANDARD

9 Press C/c to select the speaker formation image as the speakers are actually positioned, then press .

For details, see “Getting Optimal Surround Sound for a Room” (page 94).

10 Connect the calibration mic (supplied)to the A.CAL MIC jack on the front panel.

Set up the calibration mic at ear level using a tripod, etc. (not supplied).

The front of each speaker should face the calibration mic, and there should be no obstruction between the speakers and the calibration mic.

Started Getting

37GB