Playing the connected component on the system1 Press FUNCTION repeatedly until “DMPORT” appears in the front panel display.2 Start playback of the connected component.

The sound and images from the connected component are played on the system or connected TV.

For operation details, refer to the operating instructions of the DIGITAL MEDIA PORT adapter.

Tip

•When listening to MP3 or other compressed music using a portable audio source, you can enhance the sound. Select “A.F.D. STD” for “DEC. MODE” (page 63) and set the sound mode (page 65) to “MOVIE”, “MUSIC” or “NEWS”. To cancel, select other than “A.F.D. STD”.

•Depending on the type of DIGITAL MEDIA PORT adapter, you may be able to operate a connected component using either the buttons on the remote or the control unit. The following illustration shows an example of buttons that can be used in this case.

./>

H

X x

Using an S-AIR Product

The system is compatible with the S-AIR function (page 113), which allows sound transmission between S-AIR products.

About S-AIR products

There are two types of S-AIR product.

•S-AIR main unit (control unit and subwoofer in this system): This is for transmitting sound. You can use up to 3 S-AIR main unit. (The number of usable S-AIR main unit depends on the use environment.)

•S-AIR sub unit (surround amplifier in this system): This is for receiving sound.

–Surround amplifier: You can enjoy surround speaker sound wirelessly.

–S-AIR receiver (not supplied): You can enjoy system sound in another room.

S-AIR sub unit (S-AIR receiver, not supplied)

S-AIR main unit (control unit and subwoofer)

S-AIR sub unit

(surround amplifier)

74GB