The S-AIR function

Symptom

Remedy

S-AIR connection is not

• If you use another S-AIR main unit, place it more than 8 m away from this

established (sound transmission

S-AIR main unit.

is not established), e.g., the

• Confirm the ID of the S-AIR main unit and S-AIR sub unit (page 75).

indicator of the S-AIR sub unit

• You performed pairing the S-AIR main unit and another S-AIR sub unit.

does the following:

Perform pairing of the desired S-AIR sub unit (page 77).

• Turns off.

• The S-AIR main unit is paired to another S-AIR sub unit. Cancel pairing.

• Flashes.

• Install the S-AIR main unit and S-AIR sub unit away from other wireless

• Turns red.

products.

 

• Stop using another wireless product.

 

• The S-AIR sub unit is turned off. Make sure the AC power cord (mains lead)

 

is connected and turn on the S-AIR sub unit.

 

 

No sound is heard from the

• If you use another S-AIR main unit, place it more than 8 m away from this

S-AIR sub unit.

S-AIR main unit.

 

• Confirm the ID of the S-AIR main unit and S-AIR sub unit (page 75).

 

• Confirm the pairing setting (page 77).

 

• Install the S-AIR main unit and S-AIR sub unit closer together.

 

• Avoid use of equipment that generates electromagnetic energy, such as a

 

microwave oven.

 

• Install the S-AIR main unit and S-AIR sub unit away from other wireless

 

products.

 

• Stop using another wireless product.

 

• Change the “RF CHANGE” setting (page 79).

 

• Change the ID settings of the S-AIR main unit and S-AIR sub unit.

 

• Turn off the system and S-AIR sub unit, then turn on them.

There is noise or the sound skips. • If you use another S-AIR main unit, place it more than 8 m away from this S-AIR main unit.

Install the S-AIR main unit and S-AIR sub unit closer together.

Avoid use of equipment that generates electromagnetic energy, such as a microwave oven.

Install the S-AIR main unit and S-AIR sub unit away from other wireless products.

Stop using another wireless product.

Change the “RF CHANGE” setting (page 79).

Change the ID settings of the S-AIR main unit and S-AIR sub unit.

108GB