Note

•Avoid being in the measurement area and making noise during the measurement (about 1 minute), to avoid measurement failure. During the measurement, test signals are output from the speakers.

•The environment of the room in which the system is installed may affect measurements.

•If an error message appears on the TV screen, follow the message, then select [YES].

An error message appears when:

–the headphones are connected to the surround amplifier.

–the calibration microphone is not connected.

–front speakers are not correctly connected.

–surround speakers are not correctly connected.

–front and surround speakers are not correctly connected.

–subwoofer is not connected.

10 Press C/c to select [YES] or [NO], then press .xThe measurement is OK.

Disconnect the calibration microphone, then select [YES]. The result is implemented.

xThe measurement is not OK.

Follow the message, then select [YES] to retry.

Note

•While the Auto Calibration function works:

–do not turn off the power.

–do not press any button.

–do not change the volume.

–do not change the function.

–do not insert or eject a disc.

–do not connect the headphones to the surround amplifier.

–do not disconnect the calibration microphone.

•When change the surround speakers from wireless connection to wired connection or vice versa, use D.C.A.C. function to adjust the sound setting.

Tip

•You can check the distance between the listening position and each speaker. See page 96.

About error messages for the auto calibration

If the following message appears during [AUTO CALIBRATION], check “Symptoms and remedies” and retry the auto calibration.

Error

Symptoms and remedies

message

 

 

 

[Check

No channel sound can be detected.

calibration mic

Check that the calibration

connection.]

microphone is connected properly.

 

If the calibration microphone is

 

connected properly, the calibration

 

microphone or calibration

 

microphone cord may be damaged.

 

 

[Mic input level

The calibration microphone or

overloaded.]

system may be damaged.

 

Contact your Sony dealer or local

 

authorized Sony service facility.

 

 

[Check front

Front speakers are not connected.

speaker

Check that the front speakers are

connection.]

connected properly (page 23).

 

 

[Check

Only one surround speaker is

surround

connected. Check that the surround

speaker

speakers are connected properly

connection.]

(page 23).

 

 

[Check front

Front speakers are not connected

and surround

and only one surround speaker is

speaker

connected. Check that the speakers

connection.]

are connected properly (page 23).

 

 

[Check

Contact your Sony dealer or local

subwoofer

authorized Sony service facility.

connection.]

 

 

 

Adjustments and Settings Advanced

89GB