x[AUDIO (HDMI)]

You can select the audio output status from the HDMI OUT jack.

[OFF]

The system does not output the

 

sound from the HDMI OUT jack.

 

 

[ON]

The system outputs audio signals

 

by converting Dolby Digital,

 

DTS, or 96 kHz/24 bit PCM

 

signals to 48 kHz/16 bit PCM.

 

 

Note

•When you connect the control unit and TV with an HDMI cable and [ON] is selected, [AUDIO DRC], “A/V SYNC”, TONE, “DEC. MODE”, and sound mode are not applied to the sound that is output from the TV.

•When you set the function to other than “DVD”, the system does not output the sound from the HDMI OUT jack even if you set [AUDIO (HDMI)] to [ON].

x[JPEG RESOLUTION]

You can select the resolution of JPEG image files output from the HDMI OUT jack.

[SD

]

The system outputs standard

 

 

resolution with a black

 

 

frame.

 

 

 

[HD

]

The system outputs HD

 

 

resolution with a black

 

 

frame.

 

 

 

[HD]

 

The system outputs the HD

 

 

resolution without a black

 

 

frame.

 

 

[(1920×1080i)HD

] The system outputs full size

 

 

HD resolution with a black

 

 

frame.

 

 

[(1920×1080i)HD]

The system outputs full size

 

 

HD resolution without a

 

 

black frame.

 

 

 

Note

•[JPEG RESOLUTION] is effective only when you set [TV TYPE] in [VIDEO SETUP] to [16:9], and you set [HDMI RESOLUTION] in [HDMI SETUP] to other than [720×480/576p].

•You can select [(1920×1080i)HD ] or [(1920×1080i)HD] only when you set [HDMI RESOLUTION] in [HDMI SETUP] to [1920×1080i].

•If you select [(1920×1080i)HD ] or

[(1920×1080i)HD], next image appears after black screen.

•HDMI signal will stop momentarily when the system is loading or unloading a DATA CD or DATA DVD disc.

Settings for the Audio

[AUDIO SETUP]

AUDIO SETUP

S-AIR SETUP:

AUTO CALIBRATION:

 

DIGITAL IN: TV OPT, SAT/CABLE

COAX

AUDIO DRC:

OFF

TRACK SELECTION:

OFF

x[S-AIR SETUP]

You can set up the S-AIR setting. For details, see “Using an S-AIR Product” (page 74).

[ID]

You can set the ID of the S-AIR

 

main unit.

 

 

[PAIRING]

You can pair the system and

 

S-AIR sub unit, such as surround

 

amplifier or S-AIR receiver.

 

 

Note

•This function is available only when the S-AIR transmitter is inserted into the S-AIR main unit.

x[AUTO CALIBRATION]

You can calibrate the appropriate settings automatically. For details, see “Calibrating the Appropriate Settings Automatically” (page 88).

94GB