Sony 3-299-549-11(1), DAV-IS50 77GB, 4 Press, xAfter pairing, xBefore pairing, 5 Press SYSTEM MENU, 1 Place the S-AIRsub unit that you want to pair near the S-AIRmain unit

4 Press .

The setting is made.

5 Press SYSTEM MENU.

The system menu turns off.

Note

•When you set “S-AIR STBY” to “ON”, the power consumption during the standby mode increases.

•When you turn the system off while “S-AIR STBY” is set to “ON,” “S-AIR” flashes (when sound transmission between the S-AIR main unit and S-AIR receiver is not established), or lights up (when sound transmission between the S-AIR main unit and S-AIR receiver is established) in the front panel display.

•When the wireless transmitter is not inserted in the S-AIR main unit, you cannot set “S-AIR STBY”.

•“S-AIR STBY” is set to “OFF” automatically when the wireless transmitter is removed from the S-AIR main unit.

•When you turn the system off while “S-AIR STBY” is set to “ON”, you cannot use any buttons other than "/1 button.

Tip

•When there is no disc in the S-AIR main unit and “S-AIR” lights up in the front panel display, you can load a disc into the S-AIR main unit and enjoy music by the S-AIR receiver.

Identifying the S-AIR main unit with a specific S-AIR sub unit (Pairing operation)

For the surround amplifier (supplied) For the S-AIR receiver (not supplied)

It is easy to set the same ID for the S-AIR main unit and an S-AIR sub unit, such as a surround amplifier or S-AIR receiver, to establish sound transmission. However, neighbours may also receive your system’s sound if IDs are the same, or you may receive the sound from neighbours. To prevent this, you can identify the S-AIR main unit with a specific S-AIR sub unit by performing the pairing operation.

xBefore pairing

Sound transmission is established by the ID (example).

Your room Neighbour

S-AIR main unit

ID A

	ID A		ID A
S-AIR sub unit		S-AIR sub unit

xAfter pairing

Sound transmission is established between the paired S-AIR main unit and S-AIR sub unit(s) only.

Your room Neighbour

S-AIR main unit

ID A

No transmission

	ID A		ID A
S-AIR sub unit		S-AIR sub unit

Pairing

1 Place the S-AIR sub unit that you want to pair near the S-AIR main unit.

Note

•Remove headphones from the surround amplifier (if connected).

Device Audio HDMI/External for Control

continued

77GB