Sony DAVHDX279W To cancel pairing, 10Press -/-to select YES, then press, For the S-AIR receiver

8Press ,P/l, to select [S-AIR SETUP -_], then press @.

9Press'P/l, to select [PAIRING], then press @.

The confirmation display appears.

10Press <'-/-)to select [YES], then press

®.

The unit starts pairing.

To not perlorm pairing, select [NO].

11 Start pairing of the S-AIR sub unit.

• For the surround amplifier

Press POWER on the SmTound mnplifier to turu nu the surround amplifier and press PAIRING on the rear panel of the surround amplifier.

The PAIRING indicator nf the surround amplifier flashes red when pairing starts. When sound transmission is established. the PAIRING indicator of the surround amplifier turns red and the confirmation display appears.

•To press PAIRING on the rear panel of the surround amplifier, a slim instrument, such as a paper clip, can be used.

•For the S-AIR receiver

Refer tn the operating instructions of the S-AIR receiver.

When sound transmission is established. the confirmation display appears.

gNl

•Perform the pairing within several minutes afler Step lit. If you do not, the pairing is canceled automatically and the confirmation display appears. To perform pairing, select [YES]. To return to the previous display, select [NO].

12 Press <-/+to select the next operation.

•To finish pairing

Select [NO], then press @.

•To perform pairing of another S-AIR sub unit

Select [YES], then press @.

•If you perform the pairing operation between the unit and another S-AIR sub unit (page 86), sound transmission established by ID is canceled.

•When you perlk)rm pairing, [(PAIRING)] appears beside ID on Ihe display lk)r selecting ID.

To cancel pairing

Per_rm the 1D setting nf the unit according tn the procedure of "To set the ID nf the unit." If you select a new ID (ynu can select the same ID as befbre), pairing is canceled.

For	the	surround				amplifier			O
For the S-AIR receiver
									O
If you use			multiple		wireless		systems which		o
sharing the 2.4 GHz band, such as wireless LAN
or Bluetooth, the transmission of S-AIR
products or other wireless systems may be									=e
unstable.		In this		case,		the transmission		may be
									m
improved by changing the following "RF									m
									x
CHANGE"			setting.
1	Press SYSTEM					MENU.
L	Press'l"/4'repeatedly						until "RF		e"
	CHANGE" appears in the front panel								r's
	display, then press @ or -).
	Press		,I,/4, to		select the desired			setting.	O
									<
	• "AUTO": Normally select this. The								O
	system change "RF CHANGE" to "ON"
	or "OFF"			automatically.
	• "ON": The syslem transmils snund by
	searching Ihe better channel for
	transmitting.
	• "OFF": The system transmits snund by
	lixing Ihe channel for transmitting.
4 Press			@.
	The	setting		is made.

5Press SYSTEM MENU.

The system metal turns ofl.

When you set "RF CHANGE" to "OFF," select the ID so that sound transmission is most stabilized

(page 83).

•When Ihe wireless hanscciver is not inserted in the unit, you cannot set Ihe "RF CHANGE."

87Us