Sony DAVHDX279W manual Calibrating the Appropriate Settings, Automatically, gOUs, Auto Calibration

Calibrating the

Appropriate Settings

Automatically

[AUTO CALIBRATION]

D. C. A. C. (Digital Cinema Auto Calibration) can set the appropriate surround sound automatically.

•The system outputs a loud test sound when [AUTO CALIBRATION] starts. You cannot turn the vohlme down. Give consideration to children and neighbors.

•Make sure that the headphones are not connected to the unit or surround amplifier. You cannot operate the lbllowing Steps with the headphones connected.

1 Press FUNCTION +/- repeatedly until

"DVD" appears in the front panel display.

2Press C_ DISPLAY while the system is in stop mode.

The Control Menu display appears on the TV screen.

3	Press	W4, to select	_	[SETUP],
	then	press Q.
4	The options for ISETUP] appear.
	Press ./4, to select		[CUSTOM], then
	press	@.

The Setup Display appears.

5Press W4, to select [AUDIO SETUP], then press Q.

The options l\_r [AUDIO SETUP] appear.

6Press 'I"/4,to select [AUTO CALIBRATION], then press Q.

The options fin" [AUTO CALIBRATION] appear.

7Connect the calibration mic (supplied) to the A.CAL MIC jack on the front panel

Set up the calibration mic at the ear level using a tripod, etc. (not supplied).

The front of each speaker should face the calibration mic, and there should be no

obstruction belv,,een the speakers and Ihe calibralion mic.

L

mic

E,g,, DAV-HDX576WF

8 Press <.-/-) to select [YES]. 9 Press @.

[AUTO CALIBRATION] starts. Be quiet during the measurement.

•Before [AUTO CALIBRATION], make sure that the surround amplifier turns on and you install the surround amplifier in the appropriate location. If you install the surround amplifier in an inlproper location, such as another room, proper measurement will not be obtained.

•Aw)id being in the measurement area and making noise during the measurement (about 3 minute), to aw)id measurement failure. During the measumment_ test signals are output from the speakers.

•The environment of the room in which the system is installed may affect measurements.

gOUs