Sony HDX576WF, DAVHDX279W, HDX277WC manual 86us

For the surround amplifier

For the S-AIR receiver

It is easy to set tile same 1D for the unit and an S-AIR sub unit, such as a surround amplifier or S-AIR receiver, to establish sound transmission. However, neighbors may also receive your system's sound if 1Ds are tile same, or you may receive the sound li"om neighbors. To prevent this, you can ideudl_ the unit with a specific S-AIR sub unit by performing the pairing operation.

When you perform pairing

Before pairing, sound mmsmission is established by tile 1D (example).

Your room Neighbor

This unit

b

S-AIR sub unit S-AIR sub unit

After pairing, sound transmission is established

between tlle paired unit and S-AIR sub unit(s) only.

Your room	Neighbor
This unit	I
y,,,,,_
	I No transmission
L	$
S-AIR sub unit	S-AIR sub unit

Pairing

Place the S-AIR sub unit that you want to pair near the unit.

•Remove headphones from the sin-round amplifier (if connected).

2 Match the IDs of the unit and the S-AIRsub unit.

•To set the ID of the unit, see "To set tile 1D of tile unit" (page 83).

•To set tile 1D of the surround amplifier, see "To set the ID of tile surround

amplifier" (page 84).

•To set the ID of the S-AIR receiver, refi2r to the operating instructions of the S-AIR receiver.

3 Press FUNCTION +/- repeatedly until "DVD" appears in the front panel display.

4 Press @ DISPLAY while the system is

in stop mode.

The Control Menu display appears on tile TV screen.

5 Press €,14, to select B [SETUP],

then press @.

The options for [SETUP] appear.

6 Press €,14, to select [CUSTOM], then

press @.

The Setup Display appears.

7 Press €,14, to select [AUDIO SETUP],

then press @.

The options for [AUDIO SETUP] appear.

86us