Black bands appear when you record a TV screen or computer screen.

• Set [STEADYSHOT] to [OFF] (p.52).

Remote Commander (DCR-SR50E/SR60E/SR70E/SR80E)

The supplied Remote Commander does not function.

•Set [REMOTE CTRL] to [ON] (p.59).

•Insert a battery into the battery holder with the +/– polarities correctly matching the +/– marks (p.120).

•Remove any obstructions between the Remote Commander and the remote sensor.

•Point the remote sensor away from strong light sources such as direct sunlight or overhead lighting. Otherwise, the Remote Commander may not function properly.

•Remove the conversion lens (optional) as the remote sensor may be obstructed by it.

Another DVD device malfunctions when you use the supplied Remote Commander.

•Select a commander mode other than DVD 2 for your DVD device, or cover the sensor of your DVD device with black paper.

Playback

“ ” is indicated on an image in the VISUAL INDEX screen.

•Loading of the data may have failed. It may be indicated correctly when you turn off the power and then turn it on again.

•You removed the AC Adaptor or the battery pack before the ACCESS lamp is turned off after

recording. This may damage your image data and is displayed.

“” is indicated on an image in the VISUAL INDEX screen.

• The image data is damaged. Delete the image marked with (p.42).

No sound or only a low sound is heard when playing back.

•Set [MULTI-SOUND] to [STEREO] (p.57).

•Turn up the volume (p.30).

•Sound is not output when the LCD screen is closed. Open the LCD screen.

•When you record sound with [MICREF LEVEL] (p.57) set to [LOW], the recorded sound may be difficult to hear.

Image data

Images cannot be deleted.

• Protected images cannot be deleted. Cancel the image protection (p.66).

103