Step 2: Charging the battery pack

You can charge the battery after attaching the “InfoLITHIUM” battery pack (P series) (p.117) to your camcorder.

•You cannot use an NP-FP30 battery pack with your camcorder. (See the reverse side of the battery pack for the model number.) Installing the battery pack with excess force may lead to camcorder malfunction such as deterioration in battery pack performance or difficulty in removing the battery pack.

POWER switch

CHG lamp

2 Slide the POWER switch in the direction of the arrow to set it to OFF (CHG) (The default setting).

Battery

DC plug

DC IN

pack

jack

Mains lead

 

To the wall socket

AC Adaptor

 

3 Connect the AC Adaptor to the DC IN jack on the Handycam Station. Be sure that the v mark on the DC plug is facing up.

DC IN jack

1 Slide the battery pack in the

4 Connect the mains lead to the AC

direction of the arrow until it clicks.

Adaptor and the wall socket.

14