STILL SET

Settings for still images (BURST/QUALITY/IMAGE SIZE, etc.)

The default settings are marked with B. The indicators in parentheses appear when the items are selected.

See page 44 for details on selecting setup items.

BURST (DCR-SR50E/SR60E/ SR70E/SR80E)

You can record several still images one after another by pressing PHOTO.

BOFF

Select this when not recording continuously.

NORMAL ( )

Records still images continuously at approximately 0.5 seconds intervals. The numbers of the maximum recordable images are as follows:

1.0M () : 8 images

VGA (0.3M) () : 21 images 0.7M () : 8 images

EXP. BRKTG ( )

Records 3 images consecutively with different exposures at approximately 0.5 second intervals. You can compare the three images and select an image recorded at the best exposure.

The flash will not function during continuous recording.

The maximum number of images will be recorded in the self-timer mode or when you are operating with the Remote Commander (DCR-SR50E/ SR60E/SR70E/SR80E).

You may not be able to record continuous images up to the maximum number depending on the image size and the remaining hard disk space of the camcorder.

[EXP. BRKTG] does not function, if the hard disk space is only available for less than three still images.

It takes longer to record continuous images to the hard disk compared to normal recording. Record the next still image after the scroll bar indicator

( ) and the ACCESS lamp turns off.

QUALITY

BFINE ()

Recordsstill images at the fine image quality level.

STANDARD ()

Records still images at the standard image quality level.

The size of still images (Approx. kB)

 

1.0M

 

VGA

 

0.7M

(0.3M)

 

 

 

 

 

 

FINE

500

380

150

(FINE)

 

 

 

STANDARD

210

160

60

(STD)

 

 

 

IMAGE SIZE (DCR-SR50E/ SR60E/SR70E/SR80E)

B1.0M ()

Records still images clearly.

VGA (0.3M) ()

Allows for the maximum number of images to be recorded.

When the aspect ratio is changed to 16:9 (wide),

the image size is changed to [ 0.7M] ( ) (p.23).

The number of pixels for each image size is as follows:

1.0M : 1152×864

VGA (0.3M) : 640×480

0.7M : 1152×648

The maximum number of recordable still images is 9,999.

The image size of DCR-SR30E/SR40E is set to

[VGA (0.3M)] ( ).

53