5 Set the camcorder onto the Handycam Station securely.

Be sure to set the camcorder to the end.

The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery pack is fully charged.

•When setting the camcorder onto the Handycam Station, close the DC IN jack cover.

To charge the battery pack using only the AC Adaptor

Slide the POWER switch up to OFF (CHG), then connect the AC Adaptor directly to the DC IN jack on the camcorder.

CHG lamp

POWER switch

DC IN jack

DC plug

 

Open the

Battery

jack cover

 

pack

Mains lead

 

To the wall socket

AC Adaptor

 

To remove the battery pack

Slide the POWER switch to OFF (CHG). Slide the BATT (battery) release lever and remove the battery pack.

BATT (battery) release lever

•When you remove the battery pack, make sure that none of the respective lamps of the POWER switch (p.18) is on.

15