Step 4: Adjusting the LCD screen

The LCD screen

Open the LCD screen 90 degrees to the camcorder (1), then rotate it to the best angle to record or play (2).

2 180

DISP/BATT INFO

degrees

 

(max.)

 

2 90 degrees

1 90 degrees to the

(max.)

camcorder

 

•Be careful not to press the buttons on the LCD frame accidentally, when you open or adjust the LCD screen.

•If you open the LCD screen 90 degrees to the camcorder, rotate it 180 degrees to the lens side, then you can close it with the LCD screen side facing out. This is convenient during playback operations.

To turn off the LCD backlight to make the battery last longer (DCR-SR50E/ SR60E/SR70E/SR80E)

Press and hold DISP/BATT INFO for a few

seconds until appears.

This setting is practical when you use your camcorder in bright conditions or when you want to save battery power. The recorded image will not be affected by this setting. To cancel, press and hold DISP/BATT INFO

until disappears.

•See [LCD SET] - [LCD BRIGHT] (p.58) to adjust the brightness of the LCD screen.

20