xFLASH LEVEL
HIGH( )
Makes the flash level higher.
BNORMAL ( )
LOW ( )
Makes the flash level lower.
•The setting returns to [NORMAL] after you remove the power source for more than five minutes.
SUPER NSPLUS (Super NightShot plus)
You can record images at a maximum of 16 times the sensitivity of NightShot plusindark places.
Set [SUPER NSPLUS] to [ON] while the NIGHTSHOT PLUS switch is set to ON. and [“SUPER NSPLUS”] flash on the screen.
To cancel the setting, set [SUPER NSPLUS] to [OFF].
•Do not use NightShot plus and [SUPER NSPLUS] in bright places. This may cause a malfunction.
•Do not cover the infrared port with your fingers or other objects (p.32).
•Remove the conversion lens (optional).
•Adjust the focus manually ([FOCUS], p.50), when it is hard to focus automatically.
•The shutter speed of your camcorder changes depending on the brightness. The motion of the image may slow down at this time.
NS LIGHT (NightShot Light)You can record clearer images with the light which emits infrared light while using NightShot plus. The default setting is [ON].
•Do not cover the infrared port with your fingers or other objects (p.32).
•Remove the conversion lens (optional).
•The maximum shooting distance using [NS LIGHT] is about 3 m (10 feet).
COLOR SLOW S (Color Slow Shutter)
You can record an image brighter in color even in dark places.
Set [COLOR SLOW S] to [ON]. and [COLOR SLOW SHUTTER] flash on the screen.
To cancel [COLOR SLOW S], touch [OFF].
•Adjust the focus manually ([FOCUS], p.50), when it is hard to focus automatically.
•The shutter speed of your camcorder changes depending on the brightness. The motion of the image may slow down at this time.
The
Press START/STOP when
[
•You can also use the
The
Press PHOTO when [
To cancel the count down, touch [RESET]. To cancel the
•You can also use the
You can select the maximum zoom level in case you want to zoom greater than optical zoom magnification listed as below. Note that the image quality decreases when you are using the digital zoom.
51