CAMERA DATA

Movie

60min

00:00:00

 

 

AWB

Still image

60min

10/10

3SteadyShot off

4Exposure

5White balance

6Gain

7Shutter speed

8Aperture value

9Exposure value

• appears for an image recorded using a flash (optional).

•The data code is displayed on the TV screen, if you connect your camcorder to a TV.

•The indicator toggles through the following sequences as you press DATA CODE on the Remote Commander: DATE/TIME t CAMERA DATA t OFF (no indication) (DCR- SR50E/SR60E/SR70E/SR80E).

•Depending on the hard disk condition of the camcorder, bars [--:--:--] appear.

•The setting returns to [OFF] after you remove the power source for more than five minutes.

DISPLAY

You can select the number of thumbnails that appear on the VISUAL INDEX screen. Thumbnail Glossary (p.121)

BZOOM LINK

Change the number of thumbnails (6 or 12) with the zoom lever on your camcorder.*

6IMAGES

Displays thumbnails of 6 images.

12IMAGES

Displays thumbnails of 12 images.

*You can operate with the zoom buttons on the LCD frame or on the Remote Commander (DCR-SR50E/SR60E/SR70E/SR80E).

REMAINING

BAUTO

Displays the remaining hard disk free space for about eight seconds as described below.

–When your camcorder recognizes the free hard disk space, with the POWER switch

is set to (Movie)

–When you press DISP/BATT INFO to switch the screen display from off to on, with the POWER switch is set to (Movie)

–When you start recording from the line input (DCR-SR50E/SR60E/SR70E/ SR80E)

ON

Always displays the remaining hard disk free space indicator.

•When the available free space on the hard disk of the camcorder becomes less than five minutes for movie recording, the remaining free space will be displayed all the time.

REMOTE CTRL (Remote control) (DCR-SR50E/SR60E/SR70E/ SR80E)

The default setting is [ON] so that you can use the supplied Remote Commander (p.38).

•Set to [OFF] to prevent your camcorder from responding to a command sent by other device’s remote control.

•The setting returns to [ON] after you remove the power source for more than five minutes.

REC LAMP (Recording lamp) (DCR-SR50E/SR60E/SR70E/ SR80E)

The camera recording lamp will not light up during recording when you set this to [OFF]. (The default setting is [ON].)

59