•When you play back a created DVD, the ending of each movie pauses for a few seconds. However, when you make the Seamless playback setting with ImageMixer Menu, the ending of each movie does not pause. Before connecting the camcorder to a computer via USB, refer to “Setting Seamless playback”(p.83).

1 Confirm that the Handycam Station is not connected to a computer.

2 Turn on the computer.

•Close all applications running on the computer.

3 Place the recordable DVD to be saved on the disc drive of your computer.

•It is recommended that you use a new recordable DVD.

•If any software starts on the computer automatically, close it.

4 Connect the Handycam Station to the wall socket using the supplied AC Adaptor.

5 Set the camcorder onto the Handycam Station, then slide the POWER switch to turn on.

•When you set the camcorder onto the Handycam Station, connect securely onto the interface connector of the Handycam Station (p.73).

•You can perform this operation, when

whichever position of the (Movie) /

(Still) / (PLAY/EDIT) is lit.

6 Press the DVD BURN button on the Handycam Station.

[Check the connected device.] appears on the LCD screen of the camcorder.

7 Connect the (USB) jack of the Handycam Station to a computer using the supplied USB cable.

computer a with Performing

DVD creation starts up.

•During DVD creation, do not apply vibration. The DVD creation may be terminated.

•When you insert a burned DVD-RW/ DVD+RW in the disc drive in step 3, a message appears, asking if you want to delete images saved on a DVD.

•Make sure no other USB devices are connected to your computer.

81