Audio dubbing

Monitoring the new recorded sound

(1) Play back the tape on which you added audio.

(2) Turn the SEL/PUSH EXEC dial to select AUDIO MIX in in the menu settings, then press the dial.

VCR SET

HiFi SOUND

AUDIO MIX

A/VcDV OUT ST1 ST2

RETURN

[MENU] : END

(3) Turn the SEL/PUSH EXEC dial to adjust the balance between the original sound (ST1) and the new sound (ST2), then press the dial.

Five minutes after you disconnect the power supply or remove the battery pack, the AUDIO MIX setting returns to original sound (ST1) only. The default setting is original sound only.

Notes

New audio cannot be recorded on a tape already recorded in the 16-bit mode (32 kHz, 44.1 kHz or 48 kHz).

New audio cannot be recorded on a tape already recorded in the LP mode.

You cannot add audio with the DV IN/OUT jack.

You cannot add audio on the blank portion of the tape.

If an i.LINK cable (DV connecting cable) (optional) is connected to your camcorder You cannot add audio to a recorded tape.

We recommend that you add audio on a tape recorded with your camcorder If you add audio on a tape recorded with another camcorder (including other DCR-TRV40/TRV50), the sound quality may become worse.

If you set the write-protect tab of the cassette to lock

You cannot record on a tape. Slide the write-protect tab to release the write protection.

Editing

109