Sony DCR-TRV40, DCR-TRV50 To return to FN, To cancel image protection

Preventing accidental erasure

–Image protection

You can protect selected images to prevent accidental erasure of important images.

Before operation

Insert a “Memory Stick” into your camcorder.

(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV50 only) or VCR. Make sure that the LOCK switch is set to the left (unlock) position.

(2) Press INDEX on your camcorder to display the index.

(3) Press - MARK. The screen to protect the image appears.

(4) Press the image you want to protect. The “-” appears on the protected image.

2

INDEX

3,4
		-MARK		MARK	DEL	EXIT	RET.		-MARK			EXIT
			1		2	3		1	- 2			3
	-MARK	4		5		6	4			5	6
				1 / 40					2 / 40
		T				t	T					t

To return to FN

Press EXIT.

To cancel image protection

Press the image you want to cancel image protection in step 4 again. The “-” disappears.

Note

Formatting erases all information on the “Memory Stick,” including the protected image data. Before formatting a “Memory Stick”, check its contents.

If the write-protect tab on the “Memory Stick” is set to LOCK

You cannot protect images.

Operations ”Stick Memory“

167