Sony DCR-TRV40, DCR-TRV50 To cancel deleting, Labeling a cassette, To erase the label you have made, To change the label you have made, Erasing all the data in cassette memory

Labeling a cassetteTo erase the label you have made

In step 4 turn the SEL/PUSH EXEC dial to select [C], then press the dial. The last character is erased.

To change the label you have made

Insert the cassette to change the label, and operate in the same way to make a new label.

If you set the write-protect tab of the cassette to lock

You cannot label the tape. Slide the write-protect tab to release the write protection.

If the tape has too many index signal

You may not be able to label a cassette because the cassette memory becomes full. In this case, delete data you do not need.

If you have superimposed titles in the cassette

When the label is displayed, up to four titles also appear.

When the “-----” indicator has fewer than 10 spaces

The cassette memory is full.

The “-----” indicates the number of characters you can select for the label.

To enter a space

Select [ Z& ? ! ], then select the blank part.

Erasing all the data in cassette memory

You can erase all the data in cassette memory at once.

(1) Set the POWER switch to CAMERA or VCR.

(2) Press MENU, then turn the SEL/PUSH EXEC dial to select ERASE ALL in , then press the dial (p. 205).

(3) Turn the SEL/PUSH EXEC dial to select OK, then press the dial. OK changes to EXECUTE.

CM SET			CM SET
	TITLE			TITLE
	TITLEERASE			TITLEERASE
	TITLE DSPL			TITLE DSPL
	CM SEARCH			CM SEARCH
	TAPE TITLE	RETURN		TAPE TITLE	RETURN
	ERASE ALL			ERASE ALL
	RETURN	OK		RETURN	EXECUTE
[MENU] : END			[MENU] : END

(4) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial. ERASING flashes on the screen. When all the data is erased, COMPLETE is displayed.

To cancel deleting

Select RETURN with the SEL/PUSH EXEC dial in step 3 or 4.

116