Sony DCR-TRV40, DCR-TRV50 Selecting the still image quality, Using a “Memory Stick” – Introduction

Using a “Memory Stick” – Introduction

Selecting the still image quality

You can select the image quality in still image recording. The default setting is SUPER FINE.

(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV50 only) or VCR. Make sure that the LOCK switch is set to the left (unlock) position.

(2) Press MENU, then select STILL SET in with the SEL/PUSH EXEC dial (p. 203).

(3) Turn the SEL/PUSH EXEC dial to select QUALITY , then press the dial.

(4) Turn the SEL/PUSH EXEC dial to select the desired image quality , then press the dial.

1

LOCK

MENU

VCR

OFF(CHG)

CAMERA

MEMORY/

NETWORK

3	MEMORY SET
	STILL SET
		BURST
		QUALITY	SUPER FINE
		IMAGESIZE	FINE
		RETURN	STANDARD
			REMAIN
			12
	[MENU] : END
4
	MEMORY SET
	STILL SET
		BURST	STANDARD
		QUALITY
		IMAGESIZE
		RETURN	REMAIN
			36
	[MENU] : END

122