Using a “Memory Stick” – Introduction

To return to FN

Press EXIT.

To execute settings

Press OK.

To cancel settings

Press OFF to return to PAGE1/PAGE2/PAGE3.

Notes

•When using the touch panel, press operation buttons with your thumb supporting the LCD screen from the back side of it or press those buttons lightly with your index finger.

•Do not press the LCD screen with sharp objects other than the supplied stylus. (DCR- TRV50 only)

•Do not press the LCD screen too hard.

•Do not touch the LCD screen with wet hands.

•If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. You can control the display with DISPLAY/TOUCH PANEL on your camcorder.

•When operation buttons do not work even if you press them, an adjustment is required (CALIBRATION) (p. 230).

•When the LCD screen gets dirty, clean it with the supplied cleaning cloth.

When executing each item

The green bar appears above the item.

If the items are not available

The color of the items changes to gray.

Press FN to display the following buttons:

In the memory camera

PAGE1

SELFTIMER, SPOT FOCUS, PLAY, INDEX, SPOT METER

PAGE2

LCD BRT, PLAY, INDEX, MEM MIX

 

 

 

PAGE3

SLIDE SHOW, PLAY, INDEX, 9PIC PRINT

 

 

In the memory playback

 

 

 

 

 

 

 

 

PAGE1

PB ZOOM, CAM, INDEX, DELETE, + ,

–

 

 

PAGE2

LCD BRT, CAM, INDEX, DATA CODE,

+

,

–

PAGE3

SLIDE SHOW, CAM, INDEX, 9PIC PRINT,

+

, –

Operations ”Stick Memory“

121