Audio dubbing
You can record an audio sound to add to the original sound on a tape by connecting audio equipment or a microphone. If you connect the audio equipment, you can add sound to your recorded tape by specifying starting and ending points. The original sound will not be erased.
Use the Remote Commander for this operation.
Connecting the microphone with the MIC jack
Editing
MIC (PLUG IN POWER)
: Signal flow | Microphone (not supplied) |
|
You can check the recorded picture and sound by connecting the AUDIO/VIDEO jack to a TV.
The recorded sound is not output from a speaker. Check the sound by using the TV or headphones.
Connecting the microphone with the intelligent accessory shoe
Microphone (not supplied)
61