Sony DCR-TRV10, DCR-TRV8 Labeling a cassette

Labeling a cassette

If you use a tape with cassette memory, you can label a cassette. The label consist of up to 10 characters and is stored in cassette memory. When you the labeled cassette and turn the power on, the label is displayed on the screen, in the viewfinder, or on the TV screen.

(1) Insert the cassette you want to label.

(2) Set the POWER switch to VTR.

) Press MENU to make the menu display appear.

Turn the SEL/PUSH EXEC dial to select , then press the the SEL/PUSH EXEC dial to select TAPE TITLE, then the SEL/PUSH EXEC dial to select the column of the

the dial.

SEL/PUSH EXEC dial to select the desired

6 and 7 until you finish the label. EXEC dial to select [SET],

in memory.

– – –

[MENU] : END