Troubleshooting
Symptom | Cause and/or Corrective Actions |
The photo save function does not | • The |
work. | c Set the tab to write. (p. 170) |
| • The battery pack is dead. |
| c Install a charged battery pack or use the AC power adaptor instead |
| of the battery pack. (p. 13, 18) |
|
|
|
|
Others |
|
|
|
Symptom | Cause and/or Corrective Actions |
|
|
The title is not recorded. | • The tape has no cassette memory. |
| c Use a tape with cassette memory. (p. 141, 210) |
| • The cassette memory is full. |
| c Erase unnecessary title. (p. 145) |
| • The tape is set to prevent accidental erasure. |
| c Slide the |
| • Nothing is recorded in that position on the tape. |
| c Superimpose the title to the recorded position. (p. 141) |
The cassette label is not recorded.
•The tape has no cassette memory.
c Use a tape with cassette memory. (p. 149, 210)
•The cassette memory is full. c Erase some data. (p. 151)
•The tape is set to prevent accidental erasure.
c Slide the
While editing using the i.LINK cable (DV connecting cable), recording picture cannot be monitored.
cDisconnect the i.LINK cable (DV connecting cable), and connect it again. (p. 106)
Digital program editing does not function.
•The input selector on the VCR is not set correctly.
c Check the connection and set up the selector position. (p. 105)
•The camcorder is not connected to Sony DV equipment.
c Set CONTROL to IR in the menu settings and set the recording VCR to be controlled by infrared rays.
•Setting program on a blank portion of the tape is attempted. c Set the program again on a recorded portion. (p. 122)
•Your camcorder and the VCR are not synchronized. c Synchronize them. (p. 117)
220