Connecting to the AC power source
1 Insert the plug of the AC adaptor into the DC IN 24 V jack on the back of the printer.
2 Connect one plug of the AC power cord to the connector of the AC adaptor and the other plug to the wall outlet.
Notes
• Do not place the printer in an unstable location |
such as on a wobbly table. |
• Leave enough room around the printer. The print |
paper emerges from the back a few times during |
printing. Keep 10 cm (13/32 inch) or more space at |
the rear of the printer. |
• Connect the AC adaptor to an easily accessible |
wall outlet close by. If trouble occurs while using |
10 cm (13/32 inches)
AC power cord
AC adaptor
To the wall outlet
the adaptor, immediately shut off the power by |
disconnecting the plug from the wall outlet. |
• Do not short the plug of the AC adaptor with a |
metallic object, as this may cause a malfunction. |
• Do not use the AC Adaptor placed in a narrow |
space, such as between a wall and furniture. |
• When you have finished using the AC adaptor, |
disconnect the AC power cord from the |
DC IN 24 V jack of the printer and from the AC |
power sources. |
• The printer is not disconnected from the AC power |
source (mains) as long as it is connected to the wall |
outlet, even if the printer itself has been turned off. |
• A socket outlet should be as close as possible to the |
unit and easily accessible. |
To use your Printer abroad - Power sources
You can use your Printer and the AC Adaptor (supplied) in any country or region where the power supply is within 100 V to 240 V AC, 50/60 Hz.
Do not use an electronics transformer (travel converter), as this may cause a malfunction.