Printing from a PictBridge camera
You can connect a
When printing in the PictBridge mode, make sure to remove memory card(s) and your computer from the printer in advance.
1 Set your digital camera ready for printing with a
The required settings and operations that must be completed before connection differ depending on the digital camera. For details, refer to the operating instructions of your digital camera. (In case of Sony
2 Connect the printer to the AC power source (page 12).
3 Press the 1 (on/standby) button to turn on the printer.
4 Connect the
When you connect a
5 Operate the digital camera to print an image.
The printer supports the following prints:
•Single-image print
•All images print
•Index print
•DPOF print
•Borders/Borderless print
•Date print
To PictBridge/EXT
INTERFACE connector
A PictBridge camera
To USB connector
Notes
•If you replace an ink ribbon while the printer is connected to a
•When printing via the PictBridge/EXT INTERFACE connector, an image will be printed according to the settings of the Print setup menu of the printer. When you set the Date Print or Borders/Borderless options with your digital camera, the digital camera settings will have priority. If you select “Borderless” with the printer and “Borders” with your camera, “Borders (Pattern 1)” will be used for printing.
•You cannot use a USB hub or a digital camera containing a USB hub.
•For error messages displayed on your digital camera, refer to the operating instructions of your digital camera.