Printing from a Bluetooth-compliant device
Printing from a Bluetooth- compliant device
By connecting the Sony
Notes
•Do not use the
•In some regions, the Sony
Maximum number of pixels that can be handled
See page 65.
Printing procedures
When printing from the PictBridge/EXT INTERFACE connector, make sure to remove memory card(s) from the printer in advance.
1 Connect the printer to the AC power source (page 12).
2 Press the 1 (on/standby) button to turn on the printer.
3 Insert the Bluetooth adaptor into the PictBridge/EXT INTERFACE connector of your printer.
Compatible profiles for
Bluetooth communication
The DPP-FP67/FP77 supports the following profiles:
• BIP (Basic Imaging Profile) Image Push Responder
• OPP (Object Push Profile) Object Push Server
For the profiles that your Bluetooth device
supports, please refer to its manual. | Note | |
If any device, other than the Bluetooth adaptor, | ||
What is a “Profile”? | ||
such as a memory card, camera, PC, or other | ||
A profile consists of the standards that enable | USB memory or a USB cable is connected to | |
Bluetooth wireless communication. There are | any of the memory card slots, the PictBridge/ | |
several profiles available, depending on the | EXT INTERFACE connector, or USB | |
purposes and product to be used. To make | connecter of your printer, disconnect it from the | |
printer and then connect the Bluetooth adaptor. | ||
Bluetooth communication possible, the devices | ||
4 Print from the | ||
used in the communicated should support the | ||
same profile. | mobile phone, or other device. | |
Compatible image file formats that can | For printing procedures, refer to the | |
manual of your Bluetooth device. | ||
be printed | ||
| ||
See page 65. |
|
Continued