Symptom

Check

Cause/Solutions

Even if

 

c When you use an editing/recording device

“Borderless” is

 

other than the printer to edit or save an

selected, the image

 

image, the image is saved with blank areas

is printed with

—

around the image. Even if you print it with

borders on both

 

the

“Borderless” setting, you cannot

sides.

 

eliminate the borders on both sides of a

 

 

 

 

print.

 

 

 

 

The whole area of

• Did you select “Borders

c You can print the whole area of an image

an image cannot

(Pattern 1)”?

by selecting “Borders (Pattern 1).”

be printed.

 

.

“Setting the print finish (Borders/

 

 

(

 

 

 

Borderless Print)” on page 30)

 

 

 

The image is

• Is the paper tray inserted

c Re-insert the paper tray firmly straight in

printed at an angle.

properly?

to the end.

 

 

 

There are white

 

c The print head or paper path may be

lines or dots on the

—

soiled. Use the supplied cleaning cartridge

printed pictures.

and sheet to clean the head and path.

 

 

 

(.“Cleaning” on page 61)

 

 

 

The picture is too

 

c You can adjust the image.

bright, dark,

—

(.“Adjusting an image” on page 23)

reddish, yellowish,

 

 

 

 

 

 

 

or greenish.

 

 

 

 

 

 

 

The Edit menu

• Did you enlarge, reduce the

c You cannot use the Edit menu after

cannot be used.

size of, rotate, or move an

performing correction with the AUTO

 

image after performing

TOUCH-UP button. Select the Edit menu

 

correction with the AUTO

and perform these editorial operations

 

TOUCH-UP button?

first, and then perform the correction.

 

 

 

 

 

Settings

Symptom

Check

Cause/Solutions

 

 

 

The Borders/

• Are you using the Layout

c In the Layout Print menu, templates are

 

 

Borderless setting

Print menu?

used and you cannot select Borders/

 

 

does not take

 

Borderless Print.

 

 

effect.

 

 

 

Troubleshooting

 

 

 

 

 

 

 

 

Continued

55 GB