Connecting with a digital camera or other external device

Symptom

Check

Cause/Solutions

The PictBridge

• Is the digital camera

c Connect the cable correctly.

mark does not

connected correctly?

 

appear on the LCD

 

 

• Is the 1 (on/standby) button

c Turn on the 1 (on/standby) button.

screen of the

turned on?

 

digital camera.

 

 

 

• Does your digital camera

c Refer to the manual supplied with your

 

 

support PictBridge?

camera, or consult with the manufacturer.

 

 

 

 

 

c Is a memory card inserted in a slot of the

 

—

printer? If there is a memory card inserted,

 

 

remove it.

 

 

 

 

• Is the USB setting of your

c Set the USB setting of your camera to the

 

camera in PictBridge mode?

PictBridge mode.

 

 

 

You connect and

 

c The printer has developed an over-current

disconnect the

 

error. Unplug the AC power cord of the

USB cable, but

—

printer, plug it in again, and then press the

nothing happens.

 

1 (on/standby) button to recover from the

 

 

error.

 

 

 

You cannot stop

 

c The next print from the one currently

printing even if

 

printed will be canceled.

you pressed

 

c Depending on the digital camera you are

CANCEL.

—

using, you cannot cancel printing from the

 

 

printer. Operate the digital camera to stop

 

 

printing. Refer to the operating

 

 

instructions of the digital camera.

 

 

 

You cannot make

 

c The printer cannot print index prints

index prints

—

during DPOF printing. To make index

 

prints, insert the memory card directly

 

 

 

 

(.page 26).

 

 

 

56 GB