7 Press the 1 (on/standby) button to turn on the printer.
8 Connect the USB connectors of the printer and your PC with either the supplied or a commercially available USB cable.
Installation starts.
Click “Install.”
5
6 When the “Sony DPP-FP67/77 printer driver has been successfully installed.” dialog is displayed, click “Finish.”
Read the agreement thoroughly, and if you agree, check “I accept this agreement” and click “Next.” When an older version of the printer driver has been installed on your computer, the message “Older version of the printer driver has been found.” may appear on the screen. Click “Yes,” and follow the displayed instructions to restart your PC. Then, perform the installation procedures again. After the computer is restarted, the older version of printer driver will be deleted. If you install the new version of printer driver, you can use the new version of printer driver.
4
Click “Next.”
The license agreement dialog box is displayed.
3
To USB connector
To USB connector
Windows PC
Note
If you use a commercially available USB cable, use a
9 Wait for a while, then check to see that “Sony
PC a from Printing
10 When the installation is complete, remove the
To continue the process and install the PMB software, follow the procedures from step 2 on page 41.
Continued