•Under fluorescent lights that flicker, the white balance adjustment function may not work
correctly even though you select 
(fluorescent).
•When the flash strobes, the manual setting is canceled, and the image is recorded in [Auto] mode (except in WB (Flash) mode).
Shooting techniques
The image is affected by the lighting conditions. For example, the entire image appears blue under sunlight in the summer, and white items gain a reddish tint under incandescent light bulbs, etc. The human eye can resolve these problems, but digital still cameras cannot recognize the correct colors without adjustments. Normally, the camera makes these adjustments automatically, but if recorded image colors appear unnatural, we recommend that you adjust the white balance.
Adjusting the flash level
— Flash Level
Mode dial: 
/SCN
You can adjust the amout of flash light.
MENU
Control button
Mode dial
aSet the mode dial to 
or SCN.
bPress MENU.
The menu appears.
cSelect [
] (Flash Level) with b/B, then select the desired
setting with v/V.
High: Makes the flash level higher than normal.
Normal: Normal setting.
Low: Makes the flash level lower than normal.
•You can carry out this operation even when the
mode dial is set to 
(Clip Motion).
50