Sony DSR-2000, DSR-2000P manual 118

Extended Menu

Menu Setup 6 Chapter

			Menu items in the 500s, relating to tape protection
Item number	Item name		Settings
501	STILL TIMER		Select the time delay from the tape transport stopping (either the "STOP" mode" or the
			still playback mode in search mode) until the unit automatically switches to the tape
			protection mode, in order to protect the rotary heads and the tape.
			0.5S...							...30M: Set the value in the range 0.5 seconds to 30 minutes.
							8M
502	TAPE		Select the operation of the protection mode to protect the rotary heads and tape when in
	PROTECTION		the still playback mode in search (jog/shuttle) mode.
	MODE FROM					: Step forward at 1/30 normal speed every 2 seconds.
			STEP
	SEARCH
			STDBY: Switch to Standby OFF mode (the unit not on standby).
		Menu items in the 600s, relating to the time code generator
Item number	Item name		Settings
601	VITC POSITION		For DSR-2000
	SEL-1		Select a line to insert the VITC in.
			12H ...								... 20H: Select any line from 12 to 20.
								16H
			Note
			You can insert the VITC signal in two places. To insert it in two places, set both items
			601 and 602.
			For DSR-2000P
			Select a line to insert the VITC in.
			9H ...							... 22H: Select any line from 9 to 22.
					19H
			Note
			You can insert the VITC signal in two places. To insert it in two places, set both items
			601 and 602.
602	VITC POSITION		For DSR-2000
	SEL-2		Select a line to insert the VITC in.
			12H ...								... 20H: Select any line from 12 to 20.
								18H
			Note
			You can insert the VITC signal in two places. To insert it in two places, set both items
			601 and 602.
			For DSR-2000P
			Select a line to insert the VITC in.
			9H ...						... 22H: Select any line from 9 to 22.
				21H
			Note
			You can insert the VITC signal in two places. To insert it in two places, set both items
			601 and 602.

118 Chapter 6 Setup Menu