Overview 1 Chapter

Location and Function of Parts

Location and Function of Parts

There are four control panels as shown in the figure below.

Connector panel (See page 28.)

Upper control panel (See page 13.)

Lower control panel (See page 16.)

Subsidiary control panel (See page 25.)

To adjust the position of the lower control panel

You can fix the lower control panel in any position between vertical and horizontal for ease of operation.

Handle

Lock knob

When the panel is at the desired angle, turn both lock knobs to fix in position.

Release lever

If you raise the panel to the horizontal, it automatically locks in position.

To lower the panel, press both release levers.

Raise the panel by holding both ends or both handles.

To fix the panel at an angle where the lock knobs are inaccessible

1First position the panel at the desired angle, then without tightening the lock knobs, press the release levers and raise the panel to the horizontal.

2With the panel horizontal, tighten the lock knobs, then press the release levers and return the panel to the desired position, where it will lock into place.

12 Chapter 1 Overview