Sony DSR-2000, DSR-2000P 3External device connectors, 4Analog audio input/output section, REMOTE-OUT, VIDEO CONTROL connector, CONTROL PANEL connector

5DIGITAL AUDIO (AES/EBU) OUT connectors (BNC type)

These connectors onput digital audio signals in AES/ EBU format.

The left-hand connector (CH-1/2) is for audio channels 1 and 2, and the right-hand connector (CH-3/4) is for audio channels 3 and 4.

6SDI (Serial Digital Interface) INPUT connectors (BNC type)

Input digital video and audio signals in SDI (D1) format to the left-hand connector. The right-hand connector is for an active-through connection.

7SDI (Serial Digital Interface) OUTPUT 1, 2 and 3 (SUPER) connectors (BNC type)

These connectors output digital video and audio signals in SDI (D1) format.

When the CHARACTER switch on the subsidiary control panel is set to ON, connector 3 (SUPER) outputs a signal with superimposed text information.

3External device connectors

VIDEO CONTROL

1 VIDEO CONTROL connector

CONTROL PANEL

2 CONTROL PANEL connector

REMOTE-IN

3 REMOTE-IN connector

REMOTE-OUT

4 REMOTE-OUT connector

1VIDEO CONTROL connector (D-sub 15-pin) For remote control of the internal digital video processor, connect an optional remote control unit such as the UVR-60/60P or BVR-50/50P to this connector.

Note

Always power off this unit before connecting the remote control unit.

2CONTROL PANEL connector (D-sub 15-pin) When using the optional DSBK-200 Control Panel to remotely control this unit, connect the DSBK-200 to this connector.

3REMOTE-IN connector (D-sub 9-pin)

When controlling this unit from an editing controller such as the ES-7, PVE-500, BVE-600/800/910, or RM-450/450CE, connect the unit to the editing controller via this connector using the supplied 9-pin remote control cable.

When controlling another VCR from this unit, connect the VCR to this connector.

4REMOTE-OUT connector (D-sub 9-pin) This connector provides the loop-through output for remote control signals from the REMOTE-IN connector.

4Analog audio input/output section

1AUDIO IN −6dBm/0dBm/+4dBm switches

2 AUDIO IN LEVEL/600Ω switches

AUDIO IN	LEVEL			LEVEL			LEVEL			LEVEL
LOW		HIGH	LOW		HIGH	LOW		HIGH	LOW		HIGH
OFF		ON-600ΩOFF			ON-600ΩOFF			ON-600ΩOFF			ON-600Ω
	0dBm			0dBm			0dBm			0dBm
-6dBm		+4dBm -6dBm			+4dBm -6dBm			+4dBm -6dBm			+4dBm
CH-1			CH-2			CH-3			CH-4
AUDIO OUT
CH-1			CH-2			CH-3			CH-4

MONITOR AUDIO

5AUDIO OUT CH-1 to CH-4 connectors

4AUDIO IN CH-1 to CH-4 connectors

3MONITOR AUDIO connector

1AUDIO IN −6dBm/0dBm/+4dBm switches

Set these switches according to the audio input levels to the AUDIO IN CH-1 to CH-4 connectors.

Overview 1 Chapter

Chapter 1 Overview 31