Sony DSR-2000, DSR-2000P Connections for Component Analog Recording

Connections for Component Analog Recording

The following shows connections for a system in which analog playback signals from another recorder or player are recorded on the DSR-2000/2000P. In this system, the video signals are analog component signals and the audio signals are recorded from audio channels 1 and 2.

Note

In this case, the DSBK-170 Analog Component Iuput/ Output Board is required.

			2
			1
	AUDIO IN	AUDIO IN	1
TIME CODE IN
	CH-1	CH-2	CH-1	TC OUT
				AUDIO
				OUT
			CH-2	Videocassette recorder/
				player such as
				UVW-1600/1600P
				COMPONENT
				OUTPUT
DSR-2000/2000P
(recorder)	COMPONENT VIDEO IN
	(Y,R−Y,B−Y)		2

1 Cable with XLR connectors (not supplied)

2 75 Ω coaxial cable (not supplied)

DSR-2000/2000P (recorder) settings

Control	Setting
REMOTE button	Unlit
VIDEO IN button (input	Y–R, B
selection section)
CH1,1/2 button and	ANALOG
CH2,3/4 button
AUDIO IN LEVEL/600Ω	Normally, 4 dBm, 600Ω (HIGH-
switch (connector panel)	ON)

and Connections 7 Chapter

Settings

Chapter 7 Connections and Settings 131