Overview 1 Chapter

Location and Function of Parts

1INPUT display

Indicates the input signal selected with the SDTI/ i.LINK button in the input selection section.

V:SDTI: Digital video signal in SDTI(QSDI) format

SDTI: Digital video and audio signals in SDTI(QSDI) format

i.LINK: Digital video and audio signals in DV format, using i.LINK technology

2INPUT VIDEO display

Indicates the input video signal selected with the VIDEO IN button in the input selection section.

COMPOSITE: Composite video signal

Y-R, B: Y, R−Y and B−Y component video signals

S VIDEO: S-video signal

SDI: SDI video signal

SG: Video test signal

3AUDIO CH1, CH1/2 display

Indicates the input audio signal selected with the CH1, CH1/2 button in the input selection section.

ANALOG: Analog audio signal

AES/EBU: Digital audio signal in AES/EBU format

SDI: SDI audio signal

SG: Audio test signal

4AUDIO CH2, CH3/4 display

Indicates the input audio signal selected with the CH2, CH3/4 button in the input selection section. The indications available are the same as for the AUDIO CH1, CH1/2 display described above.

5PB FS (playback audio sampling frequency) display

Indicates the sampling frequency (48 kHz, 44.1 kHz or 32 kHz) at which audio is recorded on tape.

6REC MODE (audio recording mode) display Indicates the audio recording mode (2CH or 4CH) selected with extended menu item 817.

2Input selection section

1 SDTI/i.LINK button

INPUT SELECT

SDTI/i.LINK

2 VIDEO IN button

VIDEO IN

3 CH1, 1/2 button

CH-1,1/2

4 CH2, 3/4 button

CH-2,3/4

5MIXING button MIXING

1SDTI/i.LINK (SDTI(QSDI) interface/i.LINK selection) button

Each press of this button cycles through the following input signal selection options.

•Digital video signal in SDTI(QSDI) format input to the SDTI(QSDI) INPUT connector

When this is selected, use the CH1, 1/2 button and CH2, 3/4 button to select the required input audio signals.

•Digital video and audio signals in SDTI(QSDI) format input to the SDTI(QSDI) INPUT connector

•Digital video and audio signals in DV format, using i.LINK technology, input to the i.LINK connector (available when the optional DSBK-190 i.LINK/DV Input/Output Board is installed)

In the input selection/audio mode display section, the INPUT display shows the selection made with this button.

2VIDEO IN button

Each press of this button cycles through the following input video signal selection options.

•Composite video signal input to the VIDEO IN connectors.

•Component video signals input to the COMPONENT VIDEO Y/R−Y/B−Y IN connectors

•S-video signal input to the S VIDEO IN connector

•SDI video signal input to the SDI INPUT connector

•Video test signal (selected with extended menu item

710)generated by the internal signal generator

In the input selection/audio mode display section, the INPUT VIDEO display shows the selection made with this button.

14 Chapter 1 Overview